About Side Draft Cooler Covers
Side-draft cooler covers fit wall-mounted and ground-level units where air enters from the side. Covers must clear water lines, electrical boxes, and pad frames without stretching fabric over sharp cabinet edges.
- Patterns cut for exterior disconnect boxes and side ducts
- Reinforced hems along the wall-mount edge
- Water-resistant PU coating standard on 600D fabric
- Optional split-corner for junction box clearance
Frequently Asked Questions
Side-draft units pull air through a wall face; down-draft units discharge downward from the roof. Cover shape and opening placement differ — specify your draft type when ordering.
Off-season solid covers are typical. Screened vents are available if you need airflow while keeping debris out.
Mark the pipe location on your dimension sheet. We position a reinforced opening or notch so the cover does not kink the line.
Universal covers often gap at the wall line. A measured custom cover prevents wind flap and water intrusion at the hem.